1/10th RC Car Off Road Trailer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print your own 1/10th RC Car Trailer with or w-o Suspension – Fully Tested, Ready to Print!
- Ocena
- 0 / 5
- Polubienia
- 4
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
Build Your Own RC Car Trailer (On-Road + Off-Road Versions)
In this package, you’ll get all the STL files needed to print and build your own RC car trailer.
It includes two versions:
Off-Road (with suspension)
On-Road (fixed setup for simplicity)
What You’ll Need for this kit:
Once you’ve printed your parts, you’ll need a few basic components to complete the build.
For the On-Road version, you’ll need:
Bearings
Axles
Wheel hex adapters
Wheels
Nuts & bolts
For the Off-Road version, you’ll also need:
Shocks
Suspension links
Print settings:
For most parts, printing with 4+ wall lines and 4+ top/bottom layers, 35% infill will give more than enough strength. If you choose the off-road version, printing the swing arm and the swing arm mount at 100% infill is recommended.
PETG is also recommended but PLA will work just fine.
I’ve included links below to the exact parts I used. Everything is easy to find and budget friendly.
Parts List:
Bearings
Any standard 5x10x4mm bearings will work.
On-Road: 4 required
Off-Road: 8 required
Recommended option: https://www.aliexpress.com/item/1005008851988964.html?spm=a2g0o.order_list.order_list_main.10.176c1802uvT4nc
29 × M3 pairs (On-Road)
39 × M3 pairs (Off-Road)
Most connections use 10mm bolts, but for the Off-Road version you’ll need:
2 × 25mm bolts
It’s easier and often the same price to buy 25mm bolts and cut them down as needed.
(buy more just in case)
Off-Road Only Parts
Tow Hitch: (please don't forget to favorite this model too!)