Snowmobile remix by Basement Creations
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My remix of 3Drcnc great Snowmobile design, modified for ArduPilot autonomous use.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 522
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This design is my remix of the amazing original snowmobile project by 3Drcnc. I increased the size of the center frame to accommodate Ardupilot electronics and a larger 4250 560KV motor. I also lowered the gear ratio for higher speeds and modified the drivetrain to use larger bearings and shafts. While I left the front of the snowmobile mostly unchanged, I added three covers to prevent snow from getting inside.
Check out my YouTube video about this project:
This is not a complete design, I only uploaded files for the components I added or changed. To fully assemble this project, you need to visit the original project or download my STEP file. I printed all the components for this design from standard PETG and they are holding up great so far.
Mechanical Parts list:
2x 6800 Bearings (10x19x5 mm)
3x 608 Bearings (8x22x7 mm)
1x Aluminum Pipe 8x91 mm
Some screws