1 / 2
Endstop bumper CNC Parts with Xol/A4T
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little bumper to make the endstop work again.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Hello!
While upgrading my V2.4 i ran into a problem with my X Endstop. It would not get triggered when mounted on the toolhead mount.
This happens in the combination with the CNC Xol/A4T mount with CNC Live idler XY joints from Vitalii3D.
Printed part is mounted under the extrusion with one m3x10 screw. You can use hammerhead nut or normal one.
Cheers.