Cob LED panel holder for 1515 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is meant for one of those all-purpose led panels. Meant to be used for a 150x60mm panel.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Because I like to overcomplicate make stuff it didn't seem good enough to stick one of those panels straight to the side of my printer. So I made a 3d printed part to hold it in place and at an angle.
Can be printed with -whatever- material and config, but if it's an enclosed printer it's best to print it in a higher heat resist material -like abs or asa- .
The frame clip should be plenty flexible to attach it to the extrusion.
For attaching the frame to the extrusion holder I used regular wood screws (The smaller ones meant for hinges and stuff)