Cob LED panel holder for 1515 extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design is meant for one of those all-purpose led panels. Meant to be used for a 150x60mm panel.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Because I like to overcomplicate make stuff it didn't seem good enough to stick one of those panels straight to the side of my printer. So I made a 3d printed part to hold it in place and at an angle.
Can be printed with -whatever- material and config, but if it's an enclosed printer it's best to print it in a higher heat resist material -like abs or asa- .
The frame clip should be plenty flexible to attach it to the extrusion.
For attaching the frame to the extrusion holder I used regular wood screws (The smaller ones meant for hinges and stuff)