Simple Plant Support Rod / Stake *** Optional Connector Sleeve + V-Shaped Tip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plant Support Rod *** Optional Connector Sleeve + V-Shaped Tip *** 4 versions suitable for different print beds
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 298
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Plant Support Rod / Stake
+ Optional Connector Sleeve
+ V-Shaped Tip
4 different plant support rod versions, suitable for different print beds
>>> (diagonal pre-orientation to obtain the maximum length):
180 x 180 mm ---> 25 cm length
220 x 220 mm ---> 31 cm length
256 x 256 mm ---> 36 cm length
300 x 300 mm ---> 42 cm length
(diameter of the rod: 7mm)
Optional connector for extending the rod.
Optional v-shaped support tip sleeve for directly supporting individual plant shoots of houseplants without tying them up.
-----------------------------------------------------------------------------------------------------------------
10.2.2026 Update:
Added a short version with 25cm length for 180 x 180mm print beds.
------------------------------------------------------------------------------------------------------------------
The files are already pre-oriented.
My print settings for PLA:
0,2mm layer height
6 walls
60% gyroid infill
7 top and bottom shell layers
no supports needed
👉 Discover more practical tools in my Everyday Solutions Collection