Better IKEA BILRESA wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a mount for the BILRESA remote mount to improve stability.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This bilresa mount uses the original mounting plate and improves the look and stability of the remote. The pushing of the buttons is not disturbed in any way. The mount is designed based on the 3D models provided by ikea, which I shared as a convenience here:
I made a little notch to suppress the negative impact of the heightening of the seam (it might interfere with the remote…)
Just print the mount with 3 walls and 15% infill and no support. Make sure the seam is placed near the cutout and not within the edges.
After the print is finished, glue the original mounting plate inside and you are set.