L-Boxx 102 corner piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner pieces for the old generation of L-Boxxes (102)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since there were no inserts for the corners of the old generation of L-Boxxes (102), I designed some.
For each insert, the file with the feet (4 feet each) must be printed once.
Print settings:
0.2 - 0.3 mm
PLA/ PETG/ ABS
10% infill
I printed my inserts from Princore PLA CF. All other materials should also work perfectly.
How can I find out which generation of L-Boxx I have?
To do this, simply look at the side recesses when the box is open. If you have an L-Boxx from a manufacturer other than Bosch, it is definitely one of the older generations, as the new generation is reserved for Bosch.
Old generation | New generation |
|---|---|
 |  |
These inserts are only suitable for the old L-Boxxes!