Balustrade Resin Print – Architectural Railing for Diorama
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Resin printed balustrade for architectural dioramas, scale models, and miniature decorations.
- Ocena
- 0 / 5
- Polubienia
- 7
- Wydruki
- 1
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Standard Digital File License
This balustrade is a detailed architectural railing designed for resin 3D printing. It is perfect for dioramas, scale models, dollhouses, miniature buildings, and decorative projects. The design features smooth curves and classic ornamental details that look clean and sharp when printed in resin.
The model was created to be easy to print with proper supports and standard resin settings. It is ideal for hobbyists, miniature builders, and creators who need elegant railings for architectural scenes.
This model works best on resin printers to capture the fine details. It can also be resized to fit different scales and projects.
Recommended for decorative and non-structural use only.
3D printing settings
Printer type: Resin (SLA/LCD)
Machine used: Creality HALOT R6
Material: Standard UV Resin
Recommended settings:
Layer Thickness: 0.05 mm
Initial Exposure: 40 s
Exposure Time: 3.0 s
Rising Height: 5 mm
Motor Speed: 2 mm/s
Light-off Delay: 4 s
Bottom Layers: 5
Supports:
Medium column supports recommended
Model angled at approximately 30–45° for better results
Print size:
Approx. 80 × 118 × 57 mm
Print time:
About 5 hours (may vary by printer and resin)
Post-processing:
Wash in isopropyl alcohol (IPA).
Remove supports carefully.
Cure under UV light for full strength.
Safety notice:
Decorative use only. Not intended for structural or load-bearing applications. Keep away from children due to small parts.