Configurable 24mm BAM Clamp to Modular Mounting System Beam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting beam for mounting Modular Mounting System components to BAM (Ball Articulating Mount) components - clamp end
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This mounting beam has a 24mm BAM (Ball Articulating Mount - I'm coining this term here lol) clamp at one end and Modular Mounting System F-tabs at the other end. It is compatible with my quick release BAM tube mount, and theoretically any other mounting system that uses a 24mm mounting ball.
The ball clamp is slightly angled in this design to align the bottom of the clamp with the bottom of the beam to make it easier to print.
The clamping hardware used is a M6 x 35mm bolt with a washer and nut from Amazon.
Recommended Print Settings
5 outer walls
25% infill
3d Honeycomb infill pattern
Normal supports, snug
I've also included a compatible knob for convenience.
Configurable OnShape model: BAM Beam
Check out my Configurable Bolt Knob to create knobs for this and other projects!
I also have an ever-expanding collection of Modular Mounting System components.