Telecaster Guitar Headstock Template Works With US Prusacaster Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For my Prusacaster build, I wanted to cut the head stock to make it look cooler than the original paddle head stock.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For my Prusacaster build, I wanted to cut the head stock to make it look cooler than the original paddle head stock. So I designed this template so I could make a fender inspired styled head stock.
There are two versions, one that has a peg that would line up with the 1st string tuner hole, and one that doesn't have the peg since not all head stocks will have the same mounting pattern. You will want to clamp either one of them to the neck while you are cutting it.
Print Settings
Layer Height: | 0.2 | Support: | NO |
Infill : | 15% | Brim | NO |
Material: | PLA | Filament Designation : | N/A |
More Designs:
 |  |  |