Liczymy pasujące modele…
These templates will fit perfectly onto the uncut headstock so you can mark the line to cut. If you print two templates, mirrored in the Z axis, you can mark it from both sides. That should give you a reference to cut and sand at a right…
Print as you wish. Use double-sided tape or make some holes for screws. Included .STEP and Fusion360 file including Thomann headstock model too. I hope for some new and better comunity ornaments soon :-)
This is a CAD model I did for my SIEG mini lathe in order to look at the spacing of components on the main spindle when upgrading it to NSK tapered roller bearings. All dimensions were measured from my actual casting, which is from a…
This is a model of a bell with a cast iron headstock
A simple clip i've made to make videos for my youtube bass cover channel (https://www.youtube.com/@alpino76). I suggest 100% fill for more strenght. You'll need an hegagon screw M5x30mm and two M5 bolts (Hot assembly), see Assembly image.…
Many small lathes (such as my 9x20 lathe) have an internal Morse MT3 taper in the head-stock spindle. When using a center in this MT3 socket, it is very important that the socket is very clean to ensure maximum precision. This simple…
A headstock for my Printable Fretboard, modeled after my 2001 PRS Santana SE, not 1/1 in terms of it's shape but pretty close! Had to make it a bit longer near the neck to accommodate the screw. Split into separate pieces so the tuner…
This is a wall hanger that is based on the headstock from a Les Paul. Great as a coat hanger, cable hanger, headphone hanger, or anything you may want to hang on it. If you love your Les Paul, this is for you!
New design with nicer shaping to the headstock More stability: Gap added for cfk flat bar 3x0,8mm Needs 1 nut M3 and 1 screw M3x15 to M3x20 1 version for (my) USA PRS Custom 24 (1990) 1 version for (my) PRS SE Custom 24 (2019) make a…
A headstock for my Printable Fretboard: https://www.thingiverse.com/thing:6802158 Modeled after a schematic I found of a 50's Strat (my squire is a 70's classic vibe). Had to make it a bit longer near the neck to accommodate the screw so…
Ornament for giving the original headstock something extra and also protects the head.
For my Prusacaster build , I wanted to cut the head stock to make it look cooler than the original paddle head stock. So I designed this template so I could make a fender inspired styled head stock. There are two versions, one that has a…
Roommate broke his guitar and didn't have any further uses for it. So I designed a new headstock to replace it. It took a couple of itterations but I think I finally got it structurally sound and fully playable For slicing, I printed it…
This is scaled to be 1 centimeter thick. You can do a non-uniform scale on the z-axis to make it as thin as you want. When cutting out the logo or text, remember that if you are cutting all the way through, you can't have any hanging…
A small remix of one of the included headstocks from the Blend file
I made this to glue on top of the Ukulele project found here: https://www.thingiverse.com/thing:1367923
This model is a hexagonal head stock for Prusacaster guitars. The model was designed to fit the neck/headstock from the Harley Benton T-style kit . If using a different neck/headstock, you may need to make adjustments to ensure proper fit…
The Fender Telecaster is another iconic guitar that has stood the test of time! This is the next in a series of headstock hangers. Use it with coats, cables, headphones, or anything you want to hang on the wall! Prefer the Les Paul?…
This is an optional cosmetic addon for the MiniCaster Mini Clone Hero/Midi Controller. It's a mini Headstock that attaches to the end of the Neck Top. It uses the same screws you need to attach the outer edge of the neck bottom and top…
This is a headstock mat for a 1340 lathe, such as the Grizzly G4016, Jet GHB, Birmingham YCL1340gh, etc This is only half. Most 3d printers arent big enough to print this in one piece. Print 2 of them and glue them together. I am…
Das ist mein Remix über Bell with cast headstock von Leadinglights. Das Komplette teil ist die Bauanleitung.
Remix of PenPan's cover to block off an empty outlet box. I used an AI generated skull that I added tuning pegs to because this is going on my “gear wall" where my guitars hang.
Hollow variant of the Maverick headstock
Some while ago I made an MT3 version of this tool, and following that I received a request for an MT5 version. I took the opportunity to make some improvements to the original tool, and created the larger MT5 version here. I should not…
This is a faithful recreation of the Beatles Hofner Headstock. Please leave a comment if there are any inaccuracies.
I found occasionally when using the lathe that coolant would come out of the collet closer end of the headstock so I designed this little funnel to catch it and drain it back into the enclosure. You'll need some 1/4" ID hose and you'll…
Whaaat? What's that? This is a drawing template for drawing a Fender Stratocaster Jumbo headstock. I didn't draw the tuning machine holes because it depends on the type of tuners you use. Print material PLA or PETG. I made mine from PLA…
For this Ukulele: https://www.thingiverse.com/thing:219038 Printed on an Anet A8 with no supports and a 0.2mm layer height. Printed with Inland white PLA.
A hollowed version of the Renegade headstock for the Polybar
I recommend printing the bodies on a accurately calibrated printer for best fitment. I print the bodies at .2 layer height with 3 walls but 2 walls works 5 top and bottom layers 5% gyroid infill with 4 layers at 15% gyroid infill with a…
This splined socket will fit the splined nuts on the head stock bearing top cap of Yamaha Fazer 600 motorcycles 1998-2002. These nuts are found just below the top triple clamp, and the socket makes it possible to use a 32mm socket and…
Picks have one natural talent: vanishing. This holder keeps them parked right on your headstock, where you can grab one mid-song without hunting through pockets, cases, or the void behind the amp. The clip slides between two strings just…
Remixed Headstock for 3D printed tuning machines
Clean up your setup with this perfectly-fitted Capo Holder Clip For Headstock, Stores Capo On Guitar, Always Accessible Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Ablagetasse für den Spindelstock der Bernardo P600G Drehbank, damit das Werkzeug nicht gleich runterfällt. Zwei Versionen mit einem Fach oder mit Unterteilung. ................... Storage tray for the headstock of the Bernardo P600G…
an easy tray for on top of the Robust American Beauty headstock. Designed for 5/8"x1/8" magnets but 15mm will work. Needs alot of supports as there are 4.5mm standoffs on the bottom
Print in something flexible - my examples are done in TPU. Simply print and slip it under the strings above the nut and connect together - it locks together really well once the strap is connected and requires no permanent changes to your…
The Hills HNB3 is a great little bass, the head stock string mount could look a bit cleaner. Just to see how that would look I made a cover for it, which is easy to remove when needed.
Print them the way the picture looks. Also they should by default be in the correct orientation. The head stock pin gets a drop of superglue in the middle hole and them hammer in lightly the pin with the hole side facing out. The hole the…
Print on side with tree supports enabled
Headstock Badge for an old AGS guitar. Scale to the proper size for your headstock. Not as detailed as the original badges, but simplified for successful printing. Use 0.12mm layers
I mad this to add a lil more customization to my guitar, I wanted something dangly but I didnt wanna hang anything off the tuners. thus I made this doohicky...THE GUITAR CHARM HOLDER RAAAGHH!!! basically as seen in the pics it just is…
Reproduction of a Kay Headstock Badge/Emblem for an instrument between 1961-1965. Printed with Black PLA+, and then the raised areas are covered with Silver Sharpie. I do not have a multi-color printer, so this was sufficient for my needs.
Prusacaster Hexagonal Headstock – Wide Brim + Inserts This is the headstock version I used for my Prusacaster build. The original hexagonal headstock was modified with a wider front brim/lip , and I also made a complete set of matching…
Custom 3D printable replica of the classic Hofner headstock badge/plaque, designed for vintage instrument restoration and customization. Suitable for both bass or guitar. * Dimensions: 50mm x 25mm x 3mm (easily scalable if needed). *…
This model is a hexagonal head stock for Prusacaster guitars. The model was designed to fit the neck/headstock from the Harley Benton T-style kit . If using a different neck/headstock, you may need to make adjustments to ensure proper fit…
I recommend printing the bodies on a accurately calibrated printer for best fitment. I print the bodies at .2 layer height with 3 walls but 2 walls works 5 top and bottom layers 5% gyroid infill with 4 layers at 15% gyroid infill with a…
Clean up your setup with this perfectly-fitted Capo Holder Clip For Headstock, Stores Capo On Guitar, Always Accessible Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
I mad this to add a lil more customization to my guitar, I wanted something dangly but I didnt wanna hang anything off the tuners. thus I made this doohicky...THE GUITAR CHARM HOLDER RAAAGHH!!! basically as seen in the pics it just is…
This is scaled to be 1 centimeter thick. You can do a non-uniform scale on the z-axis to make it as thin as you want. When cutting out the logo or text, remember that if you are cutting all the way through, you can't have any hanging…
