3x AA battery cartridge to 18650 adapter for flashlights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use a single 18650 cell in place of a 3xAA cartridge for medium size flashlights
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Li-ion /LifePo4 safety warning
For use with “protected” cells only. Unprotected cells can be discharged too much making them hazardous when re-charged.
Some flashlights are sealed tubes with o-rings at each end. In the worst-case scenario, a failed 18500 cell can discharge up to ~4 liters of gas. If the o-rings don't release some gas, then the cap will pop off violently when you go to replace the cell potentially causing serious injury.
To mitigate these risks, consider removing one or both o-rings if present. Without o-rings, the aluminum threads of cheap flashlights are more susceptible to corrosion, so keep the flashlight away from moisture.
Intro
Many medium size multi-LED flashlights (usually ~50x 3mm LEDs) use a cartridge with 3x AA batteries for 4.5V with alkaline or 3.6V with NiCd/NiMh. These flashlights have a voltage regulator that makes them very forgiving on the input voltage and usually work great with a 3.7V Li-ion cell.
So I made an adapter to help fit an 18650 cell.
Printing
PLA or PETG OK.
CAD
The model is a simple tube with an 18.75mm inner diameter, 29.5mm outer diameter and 63.5mm height. The ends are chamfered for easier fitment.