1 / 1
3x AA battery cartridge to 18650 adapter for flashlights — image 1

3x AA battery cartridge to 18650 adapter for flashlights

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Use a single 18650 cell in place of a 3xAA cartridge for medium size flashlights

Rating
0 / 5
Likes
3
Downloads
20
Makes
0
Views
150
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Li-ion /LifePo4 safety warning

  • For use with “protected” cells only. Unprotected cells can be discharged too much making them hazardous when re-charged.

  • Some flashlights are sealed tubes with o-rings at each end. In the worst-case scenario, a failed 18500 cell can discharge up to ~4 liters of gas. If the o-rings don't release some gas, then the cap will pop off violently when you go to replace the cell potentially causing serious injury.

  • To mitigate these risks, consider removing one or both o-rings if present. Without o-rings, the aluminum threads of cheap flashlights are more susceptible to corrosion, so keep the flashlight away from moisture.

Intro

Many medium size multi-LED flashlights (usually ~50x 3mm LEDs) use a cartridge with 3x AA batteries for 4.5V with alkaline or 3.6V with NiCd/NiMh. These flashlights have a voltage regulator that makes them very forgiving on the input voltage and usually work great with a 3.7V Li-ion cell.

So I made an adapter to help fit an 18650 cell.

Printing

PLA or PETG OK.

CAD

The model is a simple tube with an 18.75mm inner diameter, 29.5mm outer diameter and 63.5mm height. The ends are chamfered for easier fitment.

Tags