Smooth Bottom Filament Guide with 608 Bearings – Creality Ender-3 V3 KE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A smooth bottom filament guide with dual 608 bearings for the Creality Ender-3 V3 KE. Designed to improve filament feedi
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This project is a bottom filament guide system designed to improve filament feeding for the Creality Ender-3 V3 KE.
The goal of this design is to provide smoother and more controlled filament movement when feeding from below, reducing drag and minimizing sharp bending angles.
⚙ Print Settings
Material: PETG recommended (PLA also works)
Layer height: 0.2 mm
Infill: 25% (tested, structurally sufficient)
Walls: 3 perimeters recommended
Supports: Required only under the bearing cone section
Brim: Optional

🔧 Components Used:
2 × 608 bearings (8×22×7 mm)
~6 cm PTFE tube (inner diameter suitable for 1.75 mm filament)
The bearings ensure smooth rotation and low friction, while the short PTFE tube helps guide the filament cleanly into the extruder path.
This setup improves feeding stability, especially when using a dry box or bottom-mounted spool configuration.
