1 / 1
MX Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have no intention to print this in real life due to the cost of filament , however maybe someone will make this the base for a cool personal stand.
You will need a 350mm size printer
The MX Stand is 440mm high , split on the middle more or less , part C is glued and hammered down to part A and part B , also the TPU top pad is glued down.
If it were me to print it, I probaly go with ASA or ABS for the non TPU parts , and around 6 walls top and bottom and 20% cubic infill.
Happy printing