Delica L400 phone holder standoff base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone holder standoff base for Mitsubishi L400 Delica dash
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A phone holder based to give a flat and level surface to mount a magsafe style phone holder on the dash area in a Mitsubishi L400 Delica.
Use strong double sided foam tape or similar to stick it to your dash. The long line should be pointing towards the right hand side of the dials surround. Then simply stick your chosen phone holder/mount to the top surface.
Printed with crosshair lines to aid alignment (see photos). I used Polymaker HT-PLA (high temp) and had set the nozzle temp a little too high (235c). I suggest printing in ABS, ASA, HT-PLA or perhaps PETG but I’ve only tried in HT-PLA.
This is the Yosh phone holder I used, pictured in the photos with an iPhone 12 in a case, but I designed and tested with an iPhone 14 pro. https://amzn.to/40bf1DA
If you find this model useful please consider making a donation, any amount appreciated https://revolut.me/rumdev