Daylight XXL Mount (Daylight on a stick XXL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to print, simple mount for Daylight XXL LED.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
An easy to print, simple mount for the Daylight XXL LED strip. The design features space to be able to route cables inside of it as well as blinders so the LEDs don't shine directly into your eyes. It is also designed with extra clearance so the connectors legs clears the blinder. I designed this for my ZeroG Nebula 370 printer. But the design will be easy to mount to any 2020 extrusion with a 5 or 6 mm slot.
Print in ABS or ASA. 0.4mm line width. 4 Walls, 5 bottom layers and top layers.
Update 2026-03-03: I've mounted the 60° lenses to my DaylightXXL lights using glue and it has really improved the throw of the light and helped direct the light where i want it. There is some chromatic abberation, but for me it isn't an issue. You can see how it looks with the bed almost all the way down (Z ~380mm) in my ZeroG Nebula 370.
Update 2026-02-16: Having tested my design I've observed that the shroud absorbs a lot of light from the Daylight XXL. Given the very wide emission angle from the LEDs, the only thing that can be done about this is to add lenses to the LEDs. I've ordered lenses for my Daylight XXL strips and will be adding them to the design to better focus the light onto the bed. Once I've tested how this works I will upload a photo of it.
BOM:
2x Voron M3 threaded inserts
2x M3x20 SHCS
2x M5 Roll in t-nuts or similar
2x M5x8 BHCS
1x Daylight XXL
30x 2835 Led optical Lens, 60° or 30° angle (optional, recommended)
https://www.aliexpress.com/item/1005006404346604.html
Enjoy!