A Planetary design that works perfectly off of the build plate. I've also included the FreeCAD file to see how I designed it or to adjust.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The STL has been generated with clearances for printing with a modern printer at relatively high speeds.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Noncommercial
I want my Voron AWD to be quiet so with it slowed down to 250 mm/sec, accel turned down to 8000, 15% gyroid infill using a 0.4mm nozzle and 0.3mm layer height, the print took just under 3 hours. The planetary operates smoothly right off of the build plate.
I've also included the FreeCAD file so you can adjust the clearances for your own specific needs. If you have an older printer- I also have two Enders, I suggest opening the gaps up to about 0.4 mm. Or, if you use OrcaSlicer for example, set "XY Size Compensation" to -0.2 to start then adjusting. This should be close to creating a working planetary for you!
The gear ratio for this planetary configuration are as follows:
2.83:1 for Sun input and Ring fixed.
1.55:1 for Ring input and Sun fixed.
-1.83:1 (Reverse) for Sun input and Carrier fixed.
Enjoy!
You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049 & https://www.printables.com/@JimChristian_3198049/models They work well :-)
-
Also, if you find value in this, please give it a like. Thanks :-)
-
This was created using a FreeCAD system that I compiled from sources:
OS: Debian GNU/Linux 13 (trixie) (X-Generic/xwayland)
Architecture: x86_64
Version: 1.2.0dev.45341 (Git)
Build date: 2026/02/13 22:33:24
Build type: Unknown
Branch: main
Hash: 3fecf957cb60b988b63f584fe7c7263977323691
Python 3.11.14, Qt 6.8.3, Coin 4.0.3, Vtk 9.3.1, boost 1_86, Eigen3 3.4.0, PySide 6.8.3
shiboken 6.8.3, xerces-c 3.3.0, IfcOpenShell 0.8.2, OCC 7.8.1
Locale: English/United States (en_US)
Navigation Style/Orbit Style/Rotation Mode: Blender/Rounded Arcball/Window center
Stylesheet/Theme/QtStyle: Darker.qss/Darker/
Logical DPI/Physical DPI/Pixel Ratio: 96/96.237/1.25
Installed mods:
* OpenTheme 2025.5.20
* ProDarkThemePack 1.0.0
* freecad.gears workbench 1.3.0
* FreeCAD-themes 2025.6.4
* Assembly4 0.60.4
