1 / 3
A Planetary design that works perfectly off of the build plate. I've also included the FreeCAD file to see how I designed it or to adjust. — image 1
1 / 3

A Planetary design that works perfectly off of the build plate. I've also included the FreeCAD file to see how I designed it or to adjust.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The STL has been generated with clearances for printing with a modern printer at relatively high speeds.

Rating
0 / 5
Likes
8
Downloads
73
Makes
0
Views
251
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I want my Voron AWD to be quiet so with it slowed down to 250 mm/sec, accel turned down to 8000, 15% gyroid infill using a 0.4mm nozzle and 0.3mm layer height, the print took just under 3 hours.  The planetary operates smoothly right off of the build plate.

I've also included the FreeCAD file so you can adjust the clearances for your own specific needs. If you have an older printer- I also have two Enders, I suggest opening the gaps up to about 0.4 mm.  Or, if you use OrcaSlicer for example, set "XY Size Compensation" to -0.2 to start then adjusting. This should be close to creating a working planetary for you!

The gear ratio for this planetary configuration are as follows:

  • 2.83:1 for Sun input and Ring fixed.

  • 1.55:1 for Ring input and Sun fixed.

  • -1.83:1 (Reverse) for Sun input and Carrier fixed.

Enjoy!

You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049  &  https://www.printables.com/@JimChristian_3198049/models  They work well  :-)

-

Also, if you find value in this, please give it a like. Thanks  :-)

-

This was created using a FreeCAD system that I compiled from sources:

OS: Debian GNU/Linux 13 (trixie) (X-Generic/xwayland)

Architecture: x86_64

Version: 1.2.0dev.45341 (Git)

Build date: 2026/02/13 22:33:24

Build type: Unknown

Branch: main

Hash: 3fecf957cb60b988b63f584fe7c7263977323691

Python 3.11.14, Qt 6.8.3, Coin 4.0.3, Vtk 9.3.1, boost 1_86, Eigen3 3.4.0, PySide 6.8.3

shiboken 6.8.3, xerces-c 3.3.0, IfcOpenShell 0.8.2, OCC 7.8.1

Locale: English/United States (en_US)

Navigation Style/Orbit Style/Rotation Mode: Blender/Rounded Arcball/Window center

Stylesheet/Theme/QtStyle: Darker.qss/Darker/

Logical DPI/Physical DPI/Pixel Ratio: 96/96.237/1.25

Installed mods:

* OpenTheme 2025.5.20

* ProDarkThemePack 1.0.0

* freecad.gears workbench 1.3.0

* FreeCAD-themes 2025.6.4

* Assembly4 0.60.4

Tags