1 / 3
Nail-In Cable Clips | 10 Sizes (3mm to 15mm) — zdjęcie 1
1 / 3

Nail-In Cable Clips | 10 Sizes (3mm to 15mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Classic nail-in cable clips for securing wires to walls and baseboards. Includes 10 sizes. Uses standard 2mm nails.

Ocena
5 / 5
Polubienia
433
Pobrania
910
Wydruki
5
Wyświetlenia
2274
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

BOM: Printed with ROSA3D High Speed PLA Gray

Save yourself a trip to the hardware store! This is a complete set of classic, nail-in cable clips for routing wires along baseboards, walls, or door frames.

Key Features:

  • Nail Compatibility: Designed to be used with standard, thin wire nails (up to 2mm in diameter). The guide hole keeps the nail straight while you hammer it in.

  • 10 Precise Sizes: The set includes clips specifically sized for different cable diameters to ensure a snug fit without crushing the wire.

    • Sizes included: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 15mm.

  • Cost-Effective: Print exactly as many as you need, whenever you need them.

Perfect for:

  • Speaker wires (3-4mm)

  • Ethernet / CAT6 cables (5-6mm)

  • Coaxial TV cables (7-8mm)

  • Heavy power cords (10-15mm)

Printing Instructions:

  • Orientation: Print them laying flat on their side. This orientation makes the "hook" part significantly stronger and prevents it from snapping when pressure is applied.

  • Supports: NONE.

  • Material: PETG or ABS is highly recommended. You will be hitting these (or near them) with a hammer, and PLA can be too brittle and shatter.

  • Infill: 100% (Solid). They are small, so printing them solid takes almost no extra time or filament but makes them much more durable.

Tagi