Creality K1 MAX 100mm glass riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
100mm glas riser for the Creality K1 MAX
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello,
I designed a riser for the OEM glass panel of my Creality K1 Max. It consists of four corner pieces that are connected with four wooden panels. The panels have a height of 97 mm and a length of 322 mm. In my case, I used MDF wood.
Each corner piece requires six M4 heat-set inserts. The wooden panels need three holes for M4 screws. The hole pattern can be marked using the printed corner pieces and a pencil.
I have not yet added ventilation holes to the wooden panels, but I may cut some in the future if needed.
Hopefully, this helps someone who is having issues with the PTFE tube getting compressed due to the original glass height.