Creality K1 MAX 100mm glass riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
100mm glas riser for the Creality K1 MAX
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello,
I designed a riser for the OEM glass panel of my Creality K1 Max. It consists of four corner pieces that are connected with four wooden panels. The panels have a height of 97 mm and a length of 322 mm. In my case, I used MDF wood.
Each corner piece requires six M4 heat-set inserts. The wooden panels need three holes for M4 screws. The hole pattern can be marked using the printed corner pieces and a pencil.
I have not yet added ventilation holes to the wooden panels, but I may cut some in the future if needed.
Hopefully, this helps someone who is having issues with the PTFE tube getting compressed due to the original glass height.