Dactyl manuform low profile 30 keys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low profile dactyl manuform with 30 keys and round corners.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A few years ago I created this model as I didn't like the sharp corners on the original dactyl manuform as well as the much higher profile which would require a palm rest.
It will fit 30 keys on each side where 5 of them are for the thumb.
In the step file there is also few smaller parts which will fit in the holes on the left side model. These are highly specific for the exact breakout board which I used and may not work for you. One is for a usb-c breakout board an another one for a button to be use for resetting the device (for programming), there is also a third hole for a 3.5mm jack to be use for power and communication to the right side. Feel free do create your own holes for which parts you want to attach to the model.
Original keyboard: https://github.com/abstracthat/dactyl-manuform