The Teardown Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smart Teardown Organizer for electronics. Optimized 1.2mm walls, honeycomb grid. 100% Support-free & easy print!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this organizer for everyone who tinkers with electronics and is tired of constantly looking for lost screws. It helps you keep your parts and tools organized, so you know exactly what goes where when you're reassembling. It has separate sections for larger modules as well as really fiddly hardware.
Assembly Instructions: Since this is a minimalist open-top design, there is no assembly required! Just print it and it's ready to hit your workbench. It’s designed to be a sturdy, one-piece solution for your projects.
Recommended Print Settings:
Tuned Geometry: I set the walls to exactly 1.2 mm. For the best results, use a 0.4 mm nozzle and set your slicer to 3 perimeters. This makes the walls solid and the print much faster.
No Supports: The model is designed to be printed 100% support-free. You'll save filament and won't have to deal with any messy cleanup.
Infill: 10–15% is plenty since the 3 perimeters provide most of the strength.
Layer Height: 0.2 mm works great.
Appearance: The honeycomb grid on the bottom isn't just for looks (though it looks cool!)—it also strengthens the base while keeping the model lightweight.