5 Inch Paper Roll Holder - Standard & 35mm Extended
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple 5 inch paper roll holder designed to keep rolls stable and prevent unspooling. Prints without supports and works
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 5 inch paper roll holder is designed as a simple modular cradle that keeps small rolls stable and centered. The curved profile prevents the roll from flattening while allowing smooth unrolling.
The model is optimized for FDM printing.
Designed in Fusion and tested on a Creality K2 Plus.
A 35mm extended base version has been added. This version gives extra clearance so a rod/bar can pass through the roll while the roll remains seated in the holder.
Print Settings (Used)
0.4mm nozzle
0.2mm layer height
4 walls
15% gyroid infill
PLA
Notes
Designed for 5 inch wide rolls
Scale accordingly if using different roll sizes
.3MF file included
.STL file included