Talon Straight Magazine Long
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended FreddyZ magazine to fit diagonally on P1S bed for maximum pew pew.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- GNU General Public License v3.0
I found it best to print in PETG as the whole thing works much smoother.
Untested with the PETG spring from Freddy Z as in theory this would require a longer bed to have the correct compression.
No Supports are required
15% Infil
Make sure bridging is not longways to magazine
Minor trimming to the rear may be required for some blasters such as BK1/2S to turn the 45 degree angle used for printing without supports to a 90 degree (very simple snip along layer lines). See photo of orange mag with the cut.
Springs can be found on OOD:
https://outofdarts.com/products/worker-talon-magazine-spring-5-pack?srsltid=AfmBOoqfKDsm_RghA2JWJbx9yHfrHna3-lwPpJoMaGIVjfNwDEToXVZs?
IFB:
https://ifb.sg/products/worker-magazine-spring?srsltid=AfmBOoprmq5YoPGbfZh7mA6hGcQXYcaoDMsYYUDuVzT2uIzXD7wZBfSP
I prefer the metal springs as they allow for better compression of spring when loading darts.