1 / 2
Frozen Castle Dollhouse Roof Spire Replacement (Toy Repair) — zdjęcie 1
1 / 2

Frozen Castle Dollhouse Roof Spire Replacement (Toy Repair)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A custom 3D-printable replacement finial/snowflake spike for a popular winter-themed dollhouse roof.

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Kids play hard, and those tall, thin plastic roof spires on toy castles are usually the first things to snap off! Instead of dealing with a broken toy or trying to glue a tiny surface area, you can easily print a sturdy replacement.

I custom-modeled this snowflake spire from scratch to serve as a replacement part for a well-known "ice princess" dollhouse. It is designed to fit right into the existing roof slot to bring the castle back to its former glory.

Printing Recommendations:

  • Orientation: Print it standing upright, exactly as it will sit on the castle.

  • Adhesion: Because it is tall and narrow, a wide brim is highly recommended to keep it from getting knocked over during the print.

  • Speed & Cooling: If you are running this on a fast CoreXY machine like a K2 Plus, I recommend slowing down the print speed for the top narrow sections and ensuring your cooling fan is at 100% so the tip doesn't melt into a blob.

  • Supports: You shouldn't need supports for the main shaft, but you may want to paint on some snug supports just under the overhangs of the snowflake motif depending on your setup.

  • Material: PLA works great for the visual aspect, but PETG will offer a bit more flex and durability against future toy-related accidents.

Note: This is a custom-modeled, third-party replacement part designed for compatibility. It is not affiliated with or endorsed by any major toy manufacturers.

Tagi