Schrader Valve to M6 adapter/Schrader air nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to convert from Schrader 8V1 thread to M6 thread. The M6 thread may be used to attach a printer nozzle.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter allows you to connect a 3D printer nozzle to an air pump creating a poor-mans pressure hose to blow dust away or blow dry. I designed this because I needed a pressurized air source to blow water out of a blind hole for a small screw.
Simply print the model in any (sensible) quality and thread a standard 3D printer nozzle into it. If your having problems threading the nozzle you may use a tap tool to refine the M6 thread.
The flow through the nozzle will depend on the printer nozzle with smaller diameters resulting in less flow.