Magnet for board / fridge - 10x2 (and 10 x 3) mm magnet embeded
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnet holder
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 193
- Wydruki
- 3
- Wyświetlenia
- 742
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Fast and simple magnet holder for sticking stuff on magnetic surface. I have 10 x 2 mm magnets laying arround and a doughter that was struggeling to pick up and place magnets on wall board - so I made this - quick and dirty :)
Magnet is placed inside during print. Hole is 10.2 x 2.2 mm and it starts after first layer. 3mf file is prepared with pause command for inserting magnet.
UPDATE: Added model for 10 x 3 mm magnet
Don't forget to put pause int the slicer after magnet height (2.2 or 3.3 mm)
I printed 3 at a time to give time to the part to cool a bit before next layer on thin head. Printed in PLA .2 layer height, no infill. I didn't (I forgot) but will next time put a scirt one layer heigher than pause layer, to prime the nozzle.
Happy printing