1 / 3
Magnet for board / fridge - 10x2 (and 10 x 3) mm magnet embeded — image 1
1 / 3

Magnet for board / fridge - 10x2 (and 10 x 3) mm magnet embeded

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Magnet holder

Rating
5 / 5
Likes
17
Downloads
194
Makes
3
Views
745
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution

Fast and simple magnet holder for sticking stuff on magnetic surface. I have 10 x 2 mm magnets laying arround and a doughter that was struggeling to pick up and place magnets on wall board - so I made this - quick and dirty :)

Magnet is placed inside during print. Hole is 10.2 x 2.2 mm and it starts after first layer. 3mf file is prepared with pause command for inserting magnet. 

UPDATE: Added model for 10 x 3 mm magnet

Don't forget to put pause int the slicer after magnet height (2.2 or 3.3 mm)

I printed 3 at a time to give time to the part to cool a bit before next layer on thin head. Printed in PLA .2 layer height, no infill. I didn't (I forgot) but will next time put a scirt one layer heigher than pause layer, to prime the nozzle. 

Happy printing

Tags