Trampolin - Gravitrax-compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trampolin - Gravitrax-compatible
- Ocena
- 4 / 5
- Polubienia
- 38
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 617
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Trampoline – Gravitrax compatible
Here I present my trampoline with TPU net.
There are two versions available for download:
The first version is based on a normal building block. It is twice as high and can be used anywhere. The "V1TrampolinoDown05" part is pressed down into the base and enables support-free printing.
The second version sits on a universal building block and allows additional tracks to run under the trampoline.
The TPU net and screw connection are the same for both versions. Print the TPU net as specified in the 3fm-file with a dummy in the middle, which eliminates the upper and lower cover layers.
Print with a 0.4 mm nozzle and a layer height of 0.2 mm. I used 0.10 mm for the screw connection.
HAPPY.PRINT:-)
If you would like to see more components from the video, take a look here:
Universal base:
Rails:
Spacer:
Basis:
Hammer: