Voron 2.4 LDO Rear Panel Seal & Filament Passthrough — TPU Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU rear seal and PTFE passthrough for Voron 2.4 LDO. Push-in, no tools. Seals chamber, kills rattle.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
TPU rear cover for the Voron 2.4 LDO kit, combining a thermal seal with an integrated PTFE filament passthrough in a single push-in part.
Why TPU? Rigid covers leave gaps at the edges. TPU conforms to the rear panel, sealing the chamber without foam tape or additional gaskets. It also eliminates rattle against the panel during high-speed prints.
Filament passthrough The integrated PTFE guide allows a slight flex as the toolhead moves, reducing strain on the Bowden tube and filament path.
Edited 03-05-2026:
B-motor Z belt clearance (v2) The PTFE channel entry point has been repositioned to route the tube toward the center of the chamber rather than toward the B motor side. This improves the natural tube arc, keeps it clear of the Z belt on the B motor, and reduces the risk of contact during travel moves.

Installation Push-in, no screws or tools. Insert the PTFE tube through the channel and press the cover into the rear panel cutout.
Print settings
Material: TPU 95A
Perimeters: 3
Infill: 20–40%
No supports needed
Compatibility Designed for Voron 2.4 350mm LDO kit rear panel cutout.
Note: The video shows an earlier prototype. The uploaded files include the latest revision (v2), which repositions the PTFE channel toward the chamber center for improved Z belt clearance, and retains the extraction tabs and snap-fit geometry from v1.
TPU Slim Edition Like the original version, this model is designed specifically for TPU. I’ve removed the "Voron Hex" patterns—while they look cool, they aren't strictly necessary for a functional seal and tend to slow down flexible prints.