Voron 2.4 LDO Rear Panel Seal & Filament Passthrough — TPU Edition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU rear seal and PTFE passthrough for Voron 2.4 LDO. Push-in, no tools. Seals chamber, kills rattle.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
A TPU cover for the rear panel cutout of the Voron 2.4 LDO kit. It seals the opening and gives the Bowden tube a flexible PTFE passthrough, all in one push-in part.
Seals without foam: a rigid cover leaves gaps at the edges. TPU follows the shape of the panel and closes them, with no foam tape or extra gaskets.
No rattle: panels resting on TPU stay quiet, even during fast prints.
Easier on the Bowden tube: the PTFE guide flexes slightly as the toolhead moves, so there's less strain on the tube and the filament path.

Which file
File | What it is | Use it? |
|---|---|---|
Voron24_LDO_Rear_Seal_Passthrough_v2 | Current version. The PTFE channel is a tall curved guide that sends the tube toward the center of the chamber, away from the Z belt on the B motor. | Yes, this is the one I use. |
Voron24_LDO_Rear_Seal_Passthrough | Older version with the Voron hex pattern on top. The tube exits toward the B motor side, not toward the center. | Old version, kept for reference. |
Voron24_LDO_Rear_Seal_Passthrough_Slim | Older version without the hex pattern, so it prints faster in TPU. Like the hex version, it doesn't aim the tube toward the center. | Old version, kept for reference. |
In v2 the channel was moved so the tube arcs naturally toward the middle of the chamber. It stays clear of the Z belt on the B motor and is less likely to touch anything during travel moves. v2 keeps the extraction tabs and the snap-fit of the older versions.
Installation
Push-in, no screws, no tools. Feed the PTFE tube through the channel, then press the cover into the rear panel cutout.
The videos show an earlier prototype; the files are the current revision.
Printing
Material: TPU 95A
Perimeters: 3
Infill: 20–40%
Supports: none
Fit
Made for the rear panel cutout of the Voron 2.4 350 LDO kit.
Works well with
Panel Glide System: gravity-held, sealed panels with tool-free access.
LDO Deck Seal with Umbilical Clip: seals the deck and holds the umbilical.
Carbon Filter That Doubles as a Chamber Heater: external filter that also warms the chamber.
Changelog
2026-03-05: v2, PTFE channel moved toward the center of the chamber for Z belt clearance.
About this description: I design, print and test everything myself. I'm a hands-on maker, not a writer, so I use AI (Claude, by Anthropic) to help me organize and polish the text.