Transparent NeXtruder Cover for Prusa Core One (+) and MK4S (Snap-Fit with template for transparent plastic window)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transparent snap‑fit NeXtruder cover for the Core One and MK4S, with a template for cutting a thin clear window insert.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A transparent alternative to the stock NeXtruder cover for the Prusa Core One (+) and MK4S. This version includes a 4-sided snap‑fit recess for a thin clear plastic window insert, along with a printable template for cutting the window using scissors. The cover maintains the original footprint while providing visibility of the NeXtruder gears during operation.
The included template can be used to trace and cut a window from common household packaging plastics. Materials in the 0.15–0.30 mm range work well. A hole punch can be used to cut the window’s corners, or the corners can be cut by hand - round looks cleaner, square is easier. The cover printed well in PETG and PETG‑CF.
Installation requires only light screw torque; over‑tightening the cover screws can inhibit the NeXtruder’s stepper motor. The snap‑fit recess is 0.8 mm deep, but the clear insert should be significantly thinner so it can flex past the retention tabs with reasonable effort.