[Prototype] Ender 3 HGX Lite + E3D V6 Hotend (Left Handed BL-Touch)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updates for a very good design making it easier to print, cleaner ebb36 setups and giving you more mounting options.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
THIS IS A PROTOTYPE, CHANGES ARE COMING SOON.
This uses the same Mounting block, Duct and Duct Backing as the original model available here.
Changes include:
Rounded edges for better strength with lower infill/walls for lower weight.
Removal of cable management on left side for cleaner setup
Added a second mounting option for probes on the left, the XY offsets should be the same as the stock BL touch mounts, but will be verified soon.
Improved selt-threading hole geometry making for a stronger screwing with no significant deformation.
Adjusted spacing for HGX Lite mounts without screwing it into an open slot.
Recommended Print settings coming soon.