Impact Wrench to Scissor Jack Adapter (17mm Socket Drive)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavy-duty adapter designed to operate a car scissor jack using a 17mm socket and an impact wrench or ratchet.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a high-strength 3D-printable adapter designed to bridge a 17mm socket wrench with a specific internal metal component. After several iterations, this model has been optimized for high torque resistance and a perfect fit.
Key Features
Dual-End Connectivity: Features a precise 17.1mm hexagonal head (ideal for a 17.3mm internal socket) and a specialized top channel for the metal insert.
Reinforced Joint: Uses a custom support ring (Torus) at the connection point to distribute stress and prevent shearing.
Optimized Internal Geometry: Designed to be printed with specific reinforcement zones to handle mechanical loads.
Recommended Print Settings
To ensure this part doesn't snap under pressure, please follow these settings (especially for PETG):
Material: PETG (Recommended for its interlayer adhesion and slight flexibility).
Wall Loops: 6 (Essential for structural integrity).
Infill: 60% Gyroid for the main body.
Critical Zone Reinforcement (Modifier): * I highly recommend adding a Height Range Modifier between the heights of 23mm and 28mm.
Set Infill to 100% and Wall Loops to 8 within this range to solidify the hexagonal head connection.
Top/Bottom Shells: 5 Layers.
Usage
Simply slide your 17mm socket over the hexagonal top and insert your metal tool into the bottom slot. This adapter is perfect for DIY repairs or custom tool setups where a standard adapter isn't available.