IKEA MAXIMERA Add-on side for MEDIUM drawer [updated]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have problem with stuff falling out or catching when closing a drawer this is for you.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have problem with stuff falling out or catching when closing a drawer this is for you.
This model is for the MEDIUM drawer (5cm between the drawer and the "bar").
For 37cm depth of drawers you need print both A and B and they combine and fill the whole space - there are cutouts in the rails so all the mechanism fits.
If you have deeper drawers you can print additional spacers (they are 10cm) to put in the middle - but since dont have the deeper drawers I cant really measure proper fit here - if you have them you can tell me and I can update the spacer to proper size.
The provided models are made for right side of the drawer - you need to mirror them in your slicer along the X axis for the left side.