SD Card Holder for the Anycubic Vyper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mountable SD card holding block designed to fit the side rail of an Anycubic Vyper printer.
- Ocena
- 4,667 / 5
- Polubienia
- 30
- Pobrania
- 233
- Wydruki
- 6
- Wyświetlenia
- 1051
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Simple SD Card holder designed to fit the side rails on the Anycubic Vyper 3D printer. You can fit 3 SD Cards, 3 micro SD Cards, and the USB Card Reader supplied with the printer for quick access.
Print Instructions
Print the model with the SD slots facing down. The slots in the model are so small your printer should have no issue bridging the gap without supports. Other than that use your favorite printer profile to get your desired quality. It's a small item so the print should be fairly quick regardless.
Assembly
Print the holder and plop it in the existing side rails wherever you find best. The part is designed to fit tightly in the bar slots, so depending on your printer setup the fit may also be tight. Please take care if you ever try to remove the holder once installed.
Attribution
Please print and re-mix this model as much as you want. Please do not use this model for commercial use.
I have uploaded a STEP file that can be modified if you'd like to make your own variation on the basic envelope design.