1 / 3
Gewürzstreuer für Ankerkraut/spice shaker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An insert to convert the Ankerkraut cork into a typical spice shaker. It comes with a magnetic lid.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 596
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A inset that converts the cork of Ankerkraut spice mixtures into a spice shaker. It comes with a magnetic lid, although this isnt strictly necessary.
I used 2 8x2,6mm magnets, same modell that is used for extruder indicators. The lid magnet is inside the lid and has to be added during print.
Instructions:
- Drill a hole into the cork, around 25mm
- Slice the three parts, you shouldnt need any supports
- Start the print: during the print you have to insert the lid into the magnet. I advice to add a small drop of super glue onto the magnet, as the space for the magnet is larger than the magnet itself(for tolarance)
- Insert the parts into the cork. Depending on the size of your drilled hole you might add a little glue to keep them in place
Please upload your makes if you liked the print:)