1 / 3
Gewürzstreuer für Ankerkraut/spice shaker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An insert to convert the Ankerkraut cork into a typical spice shaker. It comes with a magnetic lid.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 596
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A inset that converts the cork of Ankerkraut spice mixtures into a spice shaker. It comes with a magnetic lid, although this isnt strictly necessary.
I used 2 8x2,6mm magnets, same modell that is used for extruder indicators. The lid magnet is inside the lid and has to be added during print.
Instructions:
- Drill a hole into the cork, around 25mm
- Slice the three parts, you shouldnt need any supports
- Start the print: during the print you have to insert the lid into the magnet. I advice to add a small drop of super glue onto the magnet, as the space for the magnet is larger than the magnet itself(for tolarance)
- Insert the parts into the cork. Depending on the size of your drilled hole you might add a little glue to keep them in place
Please upload your makes if you liked the print:)