1 / 2
Spot Weld 18650 Battery Holders | 2x Row — zdjęcie 1
1 / 2

Spot Weld 18650 Battery Holders | 2x Row

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Double-row 18650 battery holders optimized for spot welding. Features nickel strip guides and wire routing. Support-free

Ocena
0 / 5
Polubienia
42
Pobrania
153
Wydruki
0
Wyświetlenia
366
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

BOM: Printed with ROSA3D High Speed PLA Signal Violet

The perfect companion to my single-row holders! This double-row set of 18650 cell spacers is designed for building larger, high-density lithium-ion battery packs safely and efficiently.

Key Features:

  • Spot Welding Ready: Features built-in alignment guides and indentations for your nickel strips. This keeps the strips perfectly centered over the battery terminals during spot welding.

  • Integrated Wire Routing: Designed with channels/holes to neatly run balance wires or main power leads without adding external bulk to your pack.

  • Double Row Configurations: Includes 7 different sizes to build any pack geometry you need: 2x1, 2x2, 2x3, 2x4, 2x5, 2x6, and 2x7.

  • Excellent Airflow: Proper spacing between cells prevents dangerous heat buildup during charge/discharge cycles.

Printing Instructions:

  • Orientation: Print flat on the bed.

  • Supports: NONE. The wire routing channels are optimized to bridge cleanly.

  • Material: PETG, ABS, or ASA are strongly recommended due to their temperature resistance. Avoid PLA for battery packs, as it can soften and warp from cell heat.

  • Infill: 20-30% (Grid/Gyroid) with at least 3 walls for solid structural integrity.

Tagi