1 / 3
Universal seat belt guide, spacer, and stopper — zdjęcie 1
1 / 3

Universal seat belt guide, spacer, and stopper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Single hole universal belt guide, spacer for the gap remaining in the headrest pole, and stopper for belt placement

Ocena
0 / 5
Polubienia
1
Pobrania
30
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

This is a modified Tesla Model Y seat belt guide. It's designed for the driver's side but it will work on either side. It also includes a spacer designed to go square face upward against the headrest fabric to close the gap in the headrest post and to make the seat belt guide stay in place. The holes are overbored to make it an easy fit for any vehicle. There is also a stop clip that you can clip onto the belt of the seat belt to keep the metal piece from riding down too far on the belt.

This is an all-in-one solution for troublesome seatbelts.

PETG filament was used, but other filaments should work.
---
The outside diameter size of the cylinder on the spacer matches the size of the belt guide. You can size the spacer down if you'd prefer the inlet diameter to be smaller.

Tagi