Universal seat belt guide, spacer, and stopper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single hole universal belt guide, spacer for the gap remaining in the headrest pole, and stopper for belt placement
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 30
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This is a modified Tesla Model Y seat belt guide. It's designed for the driver's side but it will work on either side. It also includes a spacer designed to go square face upward against the headrest fabric to close the gap in the headrest post and to make the seat belt guide stay in place. The holes are overbored to make it an easy fit for any vehicle. There is also a stop clip that you can clip onto the belt of the seat belt to keep the metal piece from riding down too far on the belt.
This is an all-in-one solution for troublesome seatbelts.
PETG filament was used, but other filaments should work.
---
The outside diameter size of the cylinder on the spacer matches the size of the belt guide. You can size the spacer down if you'd prefer the inlet diameter to be smaller.