Desktop Wireless Charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desktop wireless charger case using a Wireless Charging Module from Toyota
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Desktop wireless charger case using a Wireless Charging Module from a Toyota. This is not a practical design by any means because the charger used is prohibitively expensive, but perhaps someone can find use in it or remix the model. You can choose to print the case as two halves or in one piece. The side panels use captured tulle fabric as a screen.
Materials Used:
Panasonic Wireless Charging Module for Toyota Vehicles (PN 861C0-0E041)
Connector to the charging module listed above.
x4 M5 30mm Hex Bolts and washers
x4 M3 15mm buttonhead bolts and washers
320-C7 6' Power Cable (PN 223020-01)
Power Entry Receptacle (PN 770W-X2/10)
12V 46W AC to DC CONVERTER (PN IRM-45-12ST)
Adafruit Colorful 12mm Square Tactile Button Switch (Product ID: 1010)
18 AWG stranded wire, solder, and heat shrink tubing
Black tulle fabric for side panels.
Zip tie