IVAR Build Plate Holder / Plattenhalter für Druckplatten
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact 6-slot build plate holder for IKEA IVAR (50 cm). Stores up to 6 plates in only 4 cm of space.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A space-saving storage system for your printer build plates
This holder transforms the side panel of an IKEA IVAR shelf (50 cm depth) into a compact and highly functional storage system for your build plates.
Features
Stores 6 build plates in only 4 cm of width
Plates are only 4.5 mm apart when closed
Plates fan out when opened for easy access
Quick one-hand removal
All printed parts fit on 256 × 256 mm print beds (Bambu X1C, P1S, etc.)
Perfect for organized workshops and anyone who wants to keep multiple build plates within reach while saving space.
The plates are mounted on pivoting arms using 3 mm axles.
When closed, the plates sit extremely close together. When opened, they fan out so each plate can be grabbed individually.
The result is a stable, compact, and mechanically simple storage system.
Required Hardware (not printed)
6 × IKEA IVAR shelf pins / shelf supports
6 × brass rods
diameter: 3 mm
length: 125 mm
A cutting guide for the rods is included in the model.
Print Recommendations
Material: PETG or PLA+
4–5 perimeters
25–40% infill (cubic recommended)
Supports are only required for the rotor part.
Use normal supports — tree supports in Bambu Studio / OrcaSlicer may skip important areas.
Platzwunder für deine Druckplatten
Dieser Plattenhalter verwandelt das Seitenteil eines IVAR-Regals (50 cm Tiefe) in ein kompaktes, hochfunktionales Plattenmagazin.
6 Platten auf nur 4 cm Breite
Nur 4,5 mm Abstand im geschlossenen Zustand
Aufgeklappt sind alle Platten frei zugänglich
Schnelles Entnehmen mir einem Griff
Alle Teile passen auf 256 × 256 mm Druckbetten (X1C, P1S etc.)
Ideal für strukturierte Werkstätten und alle, die mehrere Druckplatten griffbereit und platzsparend lagern möchten.
Die Platten hängen auf schwenkbaren Armen mit 3 mm Achsen. Im geschlossenen Zustand liegen sie extrem dicht beieinander. Beim Aufklappen fächern sie auf und sind einzeln gut greifbar. Ergebnis: stabil, kompakt, mechanisch simpel.
Benötigtes Zubehör (nicht gedruckt)
6x IVAR-Regalträger
6x Messingstangen
Ø 3 mm
125 mm Länge
Zuschneidehilfe ist im Modell enthalten
Druckempfehlungen
Material: PETG oder PLA+
4-5 Perimeter
25-40 % Fülldichte, kubisch
Stützen nur beim Rotor notwendig. Hier besser normale Stützen. Bei Baum lassen BambuStudio und Orca wichtige Teile aus.
Wenn dir das Design gefällt, freue ich mich über ein Like oder ein Make mit Foto.
Feedback zur Weiterentwicklung ist ausdrücklich willkommen.