1 / 6
IVAR Build Plate Holder / Plattenhalter für Druckplatten — image 1
1 / 6

IVAR Build Plate Holder / Plattenhalter für Druckplatten

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Compact 6-slot build plate holder for IKEA IVAR (50 cm). Stores up to 6 plates in only 4 cm of space.

Rating
0 / 5
Likes
3
Downloads
8
Makes
0
Views
84
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

A space-saving storage system for your printer build plates

This holder transforms the side panel of an IKEA IVAR shelf (50 cm depth) into a compact and highly functional storage system for your build plates.

Features

  • Stores 6 build plates in only 4 cm of width

  • Plates are only 4.5 mm apart when closed

  • Plates fan out when opened for easy access

  • Quick one-hand removal

  • All printed parts fit on 256 × 256 mm print beds (Bambu X1C, P1S, etc.)

Perfect for organized workshops and anyone who wants to keep multiple build plates within reach while saving space.

The plates are mounted on pivoting arms using 3 mm axles.

When closed, the plates sit extremely close together. When opened, they fan out so each plate can be grabbed individually.

The result is a stable, compact, and mechanically simple storage system.

Required Hardware (not printed)

  • 6 × IKEA IVAR shelf pins / shelf supports

  • 6 × brass rods

    • diameter: 3 mm

    • length: 125 mm

A cutting guide for the rods is included in the model.

Print Recommendations

  • Material: PETG or PLA+

  • 4–5 perimeters

  • 25–40% infill (cubic recommended)

Supports are only required for the rotor part.

Use normal supports — tree supports in Bambu Studio / OrcaSlicer may skip important areas.


Platzwunder für deine Druckplatten

Dieser Plattenhalter verwandelt das Seitenteil eines IVAR-Regals (50 cm Tiefe) in ein kompaktes, hochfunktionales Plattenmagazin.

  • 6 Platten auf nur 4 cm Breite

  • Nur 4,5 mm Abstand im geschlossenen Zustand

  • Aufgeklappt sind alle Platten frei zugänglich

  • Schnelles Entnehmen mir einem Griff

  • Alle Teile passen auf 256 × 256 mm Druckbetten (X1C, P1S etc.)

Ideal für strukturierte Werkstätten und alle, die mehrere Druckplatten griffbereit und platzsparend lagern möchten.

Die Platten hängen auf schwenkbaren Armen mit 3 mm Achsen. Im geschlossenen Zustand liegen sie extrem dicht beieinander. Beim Aufklappen fächern sie auf und sind einzeln gut greifbar. Ergebnis: stabil, kompakt, mechanisch simpel.

Benötigtes Zubehör (nicht gedruckt)

  • 6x IVAR-Regalträger

  • 6x Messingstangen
    Ø 3 mm
    125 mm Länge
    Zuschneidehilfe ist im Modell enthalten

Druckempfehlungen

  • Material: PETG oder PLA+

  • 4-5 Perimeter

  • 25-40 % Fülldichte, kubisch

  • Stützen nur beim Rotor notwendig. Hier besser normale Stützen. Bei Baum lassen BambuStudio und Orca wichtige Teile aus.

Wenn dir das Design gefällt, freue ich mich über ein Like oder ein Make mit Foto.

Feedback zur Weiterentwicklung ist ausdrücklich willkommen.

Tags