DIY Ventilation Chimney System - PVC Pipe Adapter Kit (Ø110 & Ø95)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY Ventilation Chimney Kit for PVC pipes (Ø110/95). Includes rain hood, insect grilles & adapters. Outdoor ready!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DIY Ventilation Chimney System - PVC Pipe Adapter Kit (Ø110 & Ø95)
Description:
A comprehensive set of 3D-printable components designed to build a professional-grade ventilation chimney. This system is engineered to integrate standard PVC pipes into a functional, weather-protected ventilation unit, making it ideal for outbuildings, workshops, or outdoor technical structures.
The design focuses on durability and protection, featuring dedicated insect grilles and a rain hood to keep your system clean and dry.
What's included in the kit:
Main T-Joint Connector: Designed to join two Ø110 mm PVC pipes and two modified Ø95 mm pipes.
Stabilizing Adapters: Two spacers that ensure perfect alignment and stability between the pipes.
Weather Hood: A protective cap designed to keep rain and snow out of the ventilation shaft.
Modular Outlet Grilles: Each grille consists of two parts, allowing you to sandwich a fine mesh (mosquito net) in between for maximum protection.
Internal Bottom Grille: An extra layer of protection located inside the T-joint to keep pests and debris out.
Assembly Instructions:
Connect the four PVC pipes (two Ø110 mm and two Ø95 mm) to the T-joint and secure them with screws.
Pro Tip: Fill the gaps between the pipes with expanding foam. This provides excellent thermal insulation and ensures the chimney is completely sealed.
Use glue or silicone on the joints for extra weatherproofing.
The model can be scaled in your slicer to fit different pipe diameters if needed.
Recommended Print Settings:
Material: PET-G (Mandatory for UV resistance and outdoor durability).
Layer Height: 0.2 mm.
Wall Loops: 3–4 (for structural strength).
Infill: 20–30% (Gyroid recommended).
Supports: Required for the Hood and Grilles.