Miniature Figurine Display Book
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display your minis in style. A book themed shelf with 5mm walls, M4 heat sets, and simple hinges.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife wanted a unique way to show off her painted minis that wasn't just another generic acrylic box. This shelf is designed to look like a massive fantasy tome. It stands over 100mm tall inside, so it easily fits standard scales plus your larger hero units and monsters.
This thing is built like a tank. I gave it 5mm thick walls so it feels substantial and has enough plastic for M4 heat set inserts. The hinges are 5mm thick and bolted on, so they aren't going to snap or sag like a typical all-plastic hinge. The bottom 3 sets of shelves (including the floor) are 2" tall each, and the top is 35mm tall.
The Hardware:
16x M4 x 4mm Heat-Set Inserts (4 per hinge half)
16x M4 x 8mm Button Head Screws (4 per hinge half)
2x 4mm Pin (I used a printed one, included in files)
Printing Tips (Made on AD5M with Matte Grey HS PLA):
I used a 5mm brim and first layer speed of 20 mm/s.
I used the Arachne wall generator. I designed a 0.8mm floor at the bottom of the heat-set holes so the inserts don't punch through the spine during assembly.
I ran 3 wall loops for the book and 5 loops for the hinges.