FYSETC Coupler blocks adapter 12 color option
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter that uses the screw holes of the coupler blocks to use the second led strip like the LED Apron in the front
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After printing the parts for my FYSETC ERCFv2 12 colors, I found out that the ERCT coupler blocks are actually meant to be printed from a clear filament (but the FYSETC files mentions it as a opaque printed part) I decided to make it look like the Apron LEDs plates that are used in the front, and it works.
You'll need 3 heat inserts (the ones usually used for Vorons, if you're using the FYSETC ERCFv2 kit, you can use some of the spare ones but if you don't have those, you can use any M3 heat set inserts as long as the insert isn't longer than 4.5mm) and 3 M3x8mm FHCS screws.
Also If you want to use this mod, you'll need the reversed Apron LED number plates that I remixed, you can find them here